Techcon TS6500 Cartridge Holder, 2.5 Oz, 6 Oz, and 8 Oz

Description

This Techcon TS6500 cartridge holder secures small and mid-size Techkit cartridges in the mixer during two-component mixing. It is dispensing valve parts hardware for 2.5 oz, 6 oz, and 8 oz cartridge configurations, giving the cartridge a fixed position while the plunger and mix rod move through the cycle.

Where These Dispensing Valve Parts Fit

The TS6500 platform supports multiple cartridge sizes, and each size range needs holder hardware that matches the cartridge body. This holder covers the 2.5 oz, 6 oz, and 8 oz range. It should be kept separate from the larger 20 oz and 1/10 gallon holders because the cartridge body diameter and support geometry are different. When the holder matches the kit size, the cartridge stays square to the plunger, which helps the mixer drive material consistently through the internal path.

Use this part at stations that mix epoxies, sealants, potting compounds, filled resins, and other two-component materials in Techkit packages. The holder is not the wetted mixer. It is the fixture that keeps the cartridge seated while the machine handles the mixing cycle. That makes it a practical replacement when the original holder is cracked, worn, missing, or dedicated to another kit size on the same production floor.

Small-Kit Changeover Details

Quick cartridge changeover is one of the TS6500 platform maintenance advantages. A clean holder lets operators swap between compatible cartridge sizes without fighting damaged slots or improvised supports. It also gives maintenance teams a clear checkpoint when a mix problem appears. If the cartridge rocks in the holder or does not seat to the same depth every time, replace the holder before chasing controller settings or motor issues.

Keep the holder paired with the matching plunger and cover for the small-kit range. A mixed hardware set can create extra drag, uneven cartridge pressure, or a setup that takes longer than it should. Labeling holder sets by cartridge size helps operators return the right hardware after cleaning and keeps the larger 20 oz and 1/10 gallon parts out of the small-kit station.

Dispensing Valve Parts Specs

Order this holder when one TS6500 station needs a dedicated small-kit setup or a worn holder needs replacing. Browse our dispensing and mixing accessories for matching plungers, covers, collars, and mixer consumables. The Techcon product line includes TS6500 equipment and Techkit cartridge hardware.

Need Help?

Need help confirming whether your TS6500 is set up for 2.5 oz, 6 oz, or 8 oz cartridges? Call (800) 220-1966 or email [email protected].