Techcon G Series Cartridge Retainer, 2.5 oz

Description

This metal retainer holds a 2.5 oz cartridge and is one of the core dispensing valve parts in Techcon’s G Series pneumatic cartridge system, built to run at up to 100 psi (6.9 bar) of air pressure. The cartridge loads into the retainer body, a cap and hose assembly seals the back end, and the retainer becomes the pressure vessel that pushes fluid out through the cartridge nozzle when the gun trigger opens the air path.

Where These Dispensing Valve Parts Get Used

Shops dispensing small-format 2-part adhesives, sealants, and potting compounds from 2.5 oz cartridges use this retainer on a standard pneumatic gun body rather than a bulkier cartridge holder sized for 10 oz or 20 oz tubes. It suits low-volume touch-up work, prototype builds, and repair stations where a full-size cartridge would go to waste before curing out.

Fit and Handling for These Dispensing Valve Parts

Load the cartridge into the retainer before threading on the cap assembly, and confirm the o-ring seal seats fully before applying air pressure. A retainer that will not hold pressure at the rated 100 psi usually points to a worn seal rather than a fault in the metal body itself, since the retainer body is built to outlast several seal replacements.

Specifications

• Cartridge capacity: 2.5 oz
• Series: Techcon G Series
• Rated pressure: up to 100 psi (6.9 bar)
• Material: metal
• Used with: matching G Series cap and hose assembly

Order this retainer for a new 2.5 oz dispensing station, or as a spare for a gun already running the G Series system. Browse Chemical Concepts dispensing valves, mixers, and nozzles for the rest of the G Series lineup, or see the complete Techcon cartridge dispensing system.

Need Help?

Need help sizing cartridge capacity to your shot volume or gun body? Call (800) 220-1966 or email [email protected].