Techcon Cartridge Retainer, G-Series, 6 oz

Description

Dispensing valve parts for Techcon cartridge-fed dispensing guns include the retainer sleeve that holds a filled cartridge under regulated air pressure. This 6 oz cartridge retainer is a G-Series aluminum body sized for standard 6 oz cartridges used on Techcon pneumatic dispensing guns.

Dispensing Valve Parts Fitment And Use

The retainer sleeve encloses the plastic cartridge and twist-locks into the retainer cap or gun body, letting the dispensing gun pressurize the cartridge and push adhesive, sealant, or lubricant out through the valve to the nozzle. A viewing slot in the aluminum body lets an operator check remaining fluid level without disconnecting the cartridge. Techcon’s retainer line is rated to 100 psi (6.9 bar), giving the sleeve enough pressure headroom for standard shop-air dispensing setups.

Dispensing Valve Parts Ordering Notes

Match this retainer to a 6 oz cartridge and the retainer cap or gun body already in service, since Techcon’s cartridge retainers are sized to a specific volume and are not interchangeable across cartridge sizes. Related retainers, caps, and cartridge hardware are grouped in the dispensers, mixers, and nozzles category.

Confirm the exact cartridge capacity, G-Series retainer designation, and gun connection before ordering. Follow the dispensing gun instructions when loading and pressurizing the cartridge. The published retainer data identifies an aluminum body, a fluid-level viewing slot, and a 100 psi (6.9 bar) maximum rating.

The manufacturer lists several cartridge-retainer sizes, so select the 6 oz (177 ml) version by capacity and part number rather than relying on appearance alone. For manufacturer family context, see Techcon dispensing systems.

Need Help?

Need help matching a cartridge retainer to your Techcon dispensing gun? Call (800) 220-1966 or email [email protected].