Undermount Sink Fastener Kit

Description

Securely install undermount sinks to granite, marble, concrete, or wood countertops with our ChemSet Undermount Sink Fastener Kit. This comprehensive kit includes 8 sets of undermount studs, sink clips, ChemSet 633 Epoxy, mixing cups, and sticks – everything you need for a drill-free, professional-looking installation.

Benefits:

• Easy, drill-free installation on natural stone countertops
• Strong, durable bond with ChemSet 633 Quick-set epoxy
• Versatile design with 1-1/2″ diameter stud base for tight spaces
• User-friendly: Sinks install easily with included wing nuts, lock washers, and sink clips
• Comprehensive kit: Includes 25ml Hand Syringe of 633 Epoxy, mixing sticks, and cups

Kit Contents:

• (8) M1-RB38-1/4-20×0.75″ Studs
• (8) Z-Shaped Sink Clips
• (8) Wingnuts
• (8) Washers
• (1) 633 Epoxy, 25ml Hand Syringe
• (2) Mixing Sticks
• (2) Mixing Cups

Instructions:

1. Dispense adhesive: Remove cap from 633 Epoxy Adhesive and dispense a small amount until it flows from both sides (A&B)
2. Mix thoroughly: In provided mixing cup, combine equal amounts of adhesive and mix with mixing stick until completely uniform.
3. Clean surfaces: Clean bonding area and fastener with alcohol. Surfaces must be clean and dry.
4. Apply adhesive: Apply 633 Epoxy to the fastener base and set in position on the underside of the countertop around the sink cut-out.
5. Cure time: 5 Minutes of Working Time and then allow 45 minutes – 1 hour for adhesive to cure to reaching handling strength. (Full cure in 24 hours)
6. Install sink: Once cured, place the sink, mount the sink clip, add a washer, and tighten with the wingnut