Chem-Set M1 No-Drill Bonding Fastener, M6 x 16 mm Threaded Stud

Description

The Chem-Set M1 Fastener is a no-drill bonding stud that carries an M6 x 16 mm thread on a base that adheres to the work surface with structural adhesive. It gives a fabricator a load-bearing threaded anchor on metal, fiberglass, GRP, and composite panels where drilling or welding is not an option, and it accepts standard M6 hardware once the base has cured.

Where the Chem-Set M1 Fastener Fits

This stud earns its place in transportation, HVAC, marine, and enclosure builds, mounting brackets, standoffs, ground straps, and insulation pins to a surface that has to stay sealed. A bonded base spreads load across the panel face rather than concentrating it at a drilled hole, which protects thin sheet and coated skins from cracking and corrosion. Crews use it to add threaded points late in a build, after panels are painted or a tank is already assembled, without opening the substrate.

How the Chem-Set M1 Fastener Installs

Abrade and clean the mounting area, apply the recommended structural adhesive to the base, and press the stud in position until the adhesive wets out fully. After cure, thread the mating hardware onto the M6 x 16 mm stud and torque to the joint requirement. The bonded footprint carries shear and tension without piercing the panel, so the finished anchor resists vibration and holds a repeatable clamp load through service.

Specifications

Pair the stud with the matching adhesive and any retaining hardware so the joint is complete at the bench. Browse the full range of no-drill bonding fasteners to match thread size and base style to your substrate. For surface prep and bonded-stud installation demonstrations, see the Chemical Concepts YouTube channel.

Need Help?

Need help selecting thread size and adhesive for your panel material? Call (800) 220-1966 or email [email protected].