CONAP CE-1170 Acrylic Conformal Coating, 5 Gallon

Description

CONAP CE-1170 is an ELANTAS acrylic conformal coating supplied here in a 5 gallon package for electronics protection work. ELANTAS lists CE-1170 in its conformal coating portfolio, and public technical references describe it as a single-component, solvent-based acrylic coating for thin-film applications on components and printed circuit boards.

CONAP CE-1170 Uses

• Thin-film conformal coating on printed circuit boards and electronic components.
• Protective coating work on epoxy glass laminates, phenolic laminates, and similar assemblies.
• Production lines that need fast air drying or oven-assisted processing.
• Repairable acrylic coating programs where inspection and rework matter.

This package size fits shops with regular coating demand, maintenance stores, or controlled production runs. Public references note flexible film behavior, moisture barrier performance, quick drying, hydrolytic stability, and good electrical properties. Confirm the exact coating thickness, cure window, and inspection method from the current data sheet.

Use this coating only after the board layout, masking plan, connector protection, and inspection criteria are clear. Coating work can fail from trapped contamination or poor edge coverage, so production should record the application method, dry time, film thickness target, and any rework steps used on approved samples. Keep approved samples available for comparison.

CONAP CE-1170 Handling

• Clean boards and components before coating to remove flux, oil, dust, and handling residue.
• Apply by the approved spray, dip, brush, or selective coating process.
• Control ventilation and ignition sources because this is a solvent-based coating.
• Qualify masking, coating thickness, and cure before releasing production boards.

Technical Notes

ELANTAS conformal coating information identifies CONAP acrylic coatings as air-drying, solvented materials intended for fast curing. Independent technical references connect CE-1170 with Type AR acrylic coating use and printed circuitry protection.

For related products, browse Chemical Concepts coatings. For manufacturer information, visit ELANTAS.

For help selecting coating format, cure method, or inspection criteria, call (800) 220-1966 or email [email protected].