Description
dispenser parts like this Techcon tubing clamp help keep hoses and small lines controlled inside dispensing equipment, benches, and service kits. A clamp is a simple part, but it can prevent loose tubing from pulling, shifting, or rubbing against nearby hardware during routine operation.
dispenser parts for tubing control
Use a replacement clamp when the original part is bent, missing, cracked, or no longer holding the tube path in the right position. Good tubing control matters because a line that moves during operation can tug on fittings, loosen connections, or make a dispenser harder to service. A clean clamp also helps technicians route hoses the same way after maintenance.
When troubleshooting bead variation, check the supporting hardware before changing a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle style part. A loose tube can make the fluid path feel inconsistent even if the tip and cartridge are correct. Replacing worn clamps keeps the support layout repeatable and protects fittings during repeated service work.
dispenser parts specifications
| Attribute | Value |
|---|---|
| SKU | TECTSD1102-19 |
| Part type | Tubing clamp |
| Brand | Techcon |
| Use | Tubing retention and dispenser service |
| Sold | Each |
During repair, inspect the tube, adjacent fittings, and mounting point while the clamp is removed. Replace tubing that shows flattening, chemical attack, or cuts. Reinstall the clamp without pinching the line closed, then run a short dry cycle or low-pressure purge to confirm the route stays stable and clear.
Order this clamp by part number and stage it with related service hardware for faster bench repairs. Browse dispensers, mixers, and nozzles for tubing, fittings, valves, tips, and other replacement parts. Manufacturer background is available from Techcon.
Need Help?
Need help identifying tubing hardware for a Techcon dispenser or repair bench? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.