Chem-Set 40L40 Clear Counter Film, 48 Inch by 600 Foot Roll

Description

40L40 counter film is a clear temporary protection film supplied in a 48 inch by 600 foot roll for countertops, stone slabs, and tile. The film helps fabrication, storage, transport, delivery, renovation, and installation crews protect finished surfaces from dust, paint spills, scuffs, and jobsite debris.

40L40 counter film Benefits

• Clear polyethylene film lets crews protect the surface while still seeing the material below.
• 3 mil nominal thickness gives more working body than thinner temporary films.
• Water-based acrylic adhesive holds during handling and removes by pulling from the edge.
• 48 inch width covers broad countertop sections, slabs, islands, and tile areas with fewer passes.
• 600 foot roll length supports shop stocking for repeat fabrication and installation work.

The film is used as a temporary surface guard, not as a permanent laminate or packaging tape.

40L40 counter film Applications

• Countertop fabrication benches and staging racks.
• Stone slab storage, transport, and delivery protection.
• Tile surface protection during construction or renovation.
• Finished counters during cabinet, plumbing, or trim work.
• Moving and punch-list jobs where clean removal matters.

Surface Preparation and Use

Apply to clean, dry, finished surfaces after loose dust and grit have been removed. Start at one edge and lay the film down with steady pressure to avoid trapped debris. Do not apply over uncured coatings, weak finishes, or surfaces that have not been tested for temporary film use.

Remove by pulling back from the edge instead of scraping across the surface. If the job runs long, check the surface and film condition during the project so heat, sunlight, or contamination do not change removal behavior.

Technical Details and Documentation

Published 40L40 data lists 2.0 to 4.0 oz/in adhesion to steel by PSTC-101, 11 lb/sq in tensile strength by PSTC-131, 325 percent elongation by PSTC-131, and 3 mil nominal thickness by PSTC-133. For general pressure-sensitive tape education, see Pressure Sensitive Tape Council.

Ordering Help

For related masking, protection, and shop films, browse Chemical Concepts films and tapes. For help choosing width, tack level, or a surface test plan, call (800) 220-1966 or email [email protected].