Description
Chem-Set countertop protection film is a clear, medium-tack surface covering for counters and fabricated stone during storage, shop handling, construction, and transportation. The 30-inch by 600-foot roll covers broad work areas with fewer seams, while the 2.5 mil film creates a temporary barrier against routine scuffs, dust, and handling marks. It is intended for removable protection on compatible finished surfaces.
Chem-Set Countertop Protection Film During Fabrication
The film helps protect countertops, slabs, finished panels, and similar surfaces as they move from fabrication through delivery and installation. A clear construction keeps the protected material visible for identification and inspection. The 30-inch width suits wide counter sections, islands, vanities, and staged pieces where narrow strips would add labor or leave more exposed edges.
Apply the film to a clean, dry surface. Remove dust, grit, moisture, and loose debris first so those particles are not trapped under the covering. Start with a short test area, press the film evenly, and smooth it forward to limit wrinkles and trapped air. Use consistent overlap where more than one pass is required. Avoid stretching the film during application because stored tension can pull edges back over time.
Medium-Tack Removal
The medium-tack adhesive is designed to hold the covering in place during normal handling while allowing pull-off after the protection period. Surface coatings, porosity, texture, cure state, temperature, exposure time, and contamination can all affect removal. Test the film on the actual finish before broad application, especially on newly coated, aged, delicate, or unusually porous materials.
For removal, lift an edge and pull the film back at a low angle with steady force. If resistance changes, pause and inspect the finish before continuing. Replace damaged film when tears, punctures, or embedded debris reduce protection. Keep unused rolls wrapped and clean so the adhesive face does not collect shop dust before application.
Specifications
| Property | Value |
|---|---|
| SKU | PRES30L40-30 |
| Brand | Chem-Set |
| Product type | Temporary surface protection film |
| Film appearance | Clear |
| Tack level | Medium |
| Thickness | 2.5 mil |
| Roll width | 30 inches |
| Roll length | 600 feet |
For other temporary coverings and tape formats, browse our films and tapes. The Chemical Concepts application video library offers practical surface-preparation and shop-use demonstrations relevant to protective materials. Confirm finish compatibility and the intended protection period before covering a full project.
Need Help?
Need help checking film tack, roll coverage, or finish compatibility? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.