Description
The Cox CCM 380 is an 18:1 coaxial dispensing valve built to drive 380 mL two-component cartridges at 4:1 and 5:1 mix ratios. The epoxy-coated aluminum handle and steel frame carry enough mechanical leverage to move medium-to-high viscosity adhesives and sealants through a cartridge without a pneumatic gun, so a technician gets consistent plunger travel on every pull regardless of hand strength or fatigue late in a shift. Slide-in cartridge loading keeps changeover between jobs quick.
Where This Dispensing Valve Gets Used
Shops running structural adhesive, chemical anchoring, and sealant work off 380 mL coaxial cartridges reach for this dispenser when the material is too viscous to push by hand and a compressor line is not practical on site. The coaxial cartridge format keeps both components isolated until they pass through a mixing nozzle at the tip, so a crew loads one cartridge instead of managing two separate tubes and a ratio-locking bracket. That single-cartridge setup cuts changeover time between jobs, since swapping cartridges takes seconds rather than a full reload of two side-by-side tubes. Field crews moving between job sites benefit most, since there is no compressor or hose to pack and unpack at each stop.
How This Dispensing Valve Handles Ratio and Output
The 18:1 thrust ratio means each pull of the trigger moves the plunger through mechanical leverage rather than raw hand force, which matters most at the higher end of the viscosity range this dispenser is rated for. A compatible 2 part mixing nozzle threads onto the cartridge outlet to blend resin and hardener before the bead reaches the work surface. Matching that mixing nozzle, including a jb weld mixing nozzle sized for a different cartridge family, to the cartridge’s exact ratio and outlet geometry is what keeps output on-ratio from the first shot to the last. A mismatched or loose nozzle connection is the fastest way to lose ratio control mid-bead on a coaxial system like this one.
Cox CCM 380 Specifications
| Spec | Detail |
|---|---|
| SKU | COX-CCM380-4-1 |
| Cartridge Size | 380 mL coaxial |
| Mix Ratio | 4:1 and 5:1 |
| Thrust Ratio | 18:1 |
| Maximum Thrust | 3.5 kN |
| Handle | Epoxy-coated aluminum |
| Frame | Epoxy-coated steel |
| Manufacturer | Cox |
Load the CCM 380 with a cartridge rated for its 4:1 or 5:1 ratio range and thread on a nozzle sized to match before dispensing. Browse the dispensers, mixers, and nozzles category for compatible mixing nozzles and coaxial cartridges sized to this dispenser. Cox maintains full specifications for its manual dispenser line at Cox.
Need Help?
Need help matching a mixing nozzle or cartridge ratio to this dispenser? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.