Techcon TS5623HU UHMWPE Hand Held Diaphragm Valve

Description

TS5623HU diaphragm valve is a Techcon hand-held diaphragm valve assembly with UHMWPE wetted parts for manual fluid dispensing. This TS5623HU version uses UHMWPE housing and diaphragm, a 1/8 NPT female fluid inlet, male luer lock outlet, 70 psi maximum fluid pressure, and a 1 to 50,000 cps viscosity range.

TS5623HU diaphragm valve Benefits

• Finger lever actuation lets operators dispense without a separate controller.
• Internal spring return closes the valve when the lever is released.
• Short opening stroke gives fast shutoff for beads and small manual deposits.
• UHMWPE wetted parts support broad chemical compatibility for many fluids.
• Sealless diaphragm design helps isolate the actuator from the material path.

Use this item when a dispensing station needs a known Techcon replacement part or manual control component. Confirm the matching valve, syringe barrel, receiver head, or fluid path before installation, then inspect nearby seals, fittings, and tips so the full assembly is ready for service.

TS5623HU diaphragm valve Applications

• Hand dispensing low to medium viscosity adhesives, anaerobics, and cyanoacrylates.
• Manual bead and shot work where timed controller operation is not required.
• Bench assembly stations that need a compact valve body.
• Maintenance replacement for existing Techcon hand-held diaphragm valves.
• Fluid feeds from Techcon pressure tanks or syringe barrels.

Setup And Service Notes

Connect the fluid reservoir feed tube to the inlet, attach the proper dispensing tip or nozzle to the outlet, and keep reservoir pressure within the stated limit. Prime the valve into a waste container until flow is steady. If deposits are inconsistent, check reservoir pressure, tip size, line condition, and material viscosity before changing parts.

Keep the part number on the maintenance list and store spares in clean packaging. Dispensing components are often small, but a worn sleeve, valve, or gun can stop a line just as quickly as a larger failed assembly. Replace damaged parts before loading production material, and run a controlled test shot or bead after service.

Technical Details And Documentation

Techcon store and TS5623 Series data sheet information identify TS5623HU as the UHMWPE hand-held diaphragm valve version and list key connection, pressure, viscosity, and application details. Review current manufacturer information from Techcon before changing a dispensing process or maintenance procedure.

Dispensing And Ordering Help

For related guns, valves, cartridges, hoses, and nozzles, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching parts to a Techcon setup, call (800) 220-1966 or email [email protected].