Techcon TS924 Foot Valve Dispenser

Description

The Techcon TS924 dispensing valve is a floor-mounted pneumatic foot dispenser for controlled adhesive, sealant, coating, and compound application. It gives the operator foot-actuated air control while the syringe, cartridge, or valve stays positioned at the work surface. The unit combines a pressure regulator, pressure gauge, and fast-dump three-way air valve in a compact under-bench format for simple manual dispense stations.

Where this dispensing valve fits

The TS924 is useful when a bench process needs more control than hand squeezing but does not require a digital timer or automated controller. The operator controls the start, stop, output rate, and shot size by foot action, which leaves both hands free to hold the part and guide the dispense tip. That makes it practical for prototype work, repair benches, potting touchups, gasket beads, light coating passes, and small assembly jobs where the same material may be applied to many different part shapes.

Because the dispenser is fully pneumatic, it belongs in stations with shop air already available. The built-in regulator lets the operator adjust pressure at the foot valve instead of walking back to a wall regulator, and the gauge gives a quick visual reference when the job repeats across shifts. The fast-dump valve helps release pressure quickly at the end of a dispense cycle so the bead stops more cleanly than it would with a slow bleed-off setup.

How the TS924 dispensing valve handles bench work

Set the air pressure for the material, confirm the connected barrel or valve is secure, and test the first bead on scrap before moving to production parts. Lower pressure gives better control with thin fluids, while higher pressure may be needed for thicker sealants or compounds. The foot control is especially useful when the operator needs to move around a part without changing hand position. Use fresh tips, clean fittings, and sound tubing so pressure changes at the pedal translate into predictable material flow at the outlet.

Techcon TS924 specifications

Ordering this dispensing valve

Order the TS924 when the work cell needs a simple pneumatic dispense station with operator-controlled shots and both hands free at the part. Pair it with compatible barrels, tips, tubing, and fittings for the material in use. For adjacent dispensers, tips, and fluid-control accessories, browse dispensers, mixers, and nozzles. For current manufacturer information, visit Techcon.

Need Help?

Need help matching foot control, air pressure, and tip size to your fluid? Call (800) 220-1966 or email [email protected].