Techcon Fluid Line Assembly, 36 in, Female/Female

Description

This 36 in fluid line is one of the replacement dispensing valve parts that keeps material moving between compatible dispensing hardware without adding loose tube cuts or separate fittings. It uses 0.100 in ID polyethylene tubing with molded female Luer lock ends, giving maintenance teams a ready-made line for medium-length runs on Techcon dispensing stations.

Where these dispensing valve parts fit

The 36 in length is a useful middle ground when an 18 in line is too short but a 60 in line would add extra volume and clutter. It can bridge a valve, manifold, syringe barrel, or adaptor where the components are mounted across a fixture or workbench. The female/female Luer lock layout is meant for mating male Luer connections at both ends. This part is not a mixing nozzle, a 2 part mixing nozzle, or a jb weld mixing nozzle. It is the transfer line that feeds the dispense path before the material reaches a tip, needle, or mixer.

Techcon publishes the TSD126 fluid line family as molded Luer lock assemblies for standard Luer lock connectors, with working pressure up to 100 psi when used correctly. The 0.100 in bore supports practical flow for many adhesive, sealant, coating, and grease applications while staying small enough for compact dispensing hardware. Natural PE tubing gives the operator a visual check for air pockets, discoloration, cured adhesive, or residue that may affect the next run.

How dispensing valve parts like this are handled

• Pack quantity: 10 fluid line assemblies.
• Tube size: 0.100 in ID by 36 in long.
• Connection style: female Luer lock to female Luer lock.
• Material: natural polyethylene tubing.
• Use case: medium-length fluid transfer between compatible dispense components.

Install the line by threading the Luer connections straight and checking that both ends seat evenly. Avoid sharp bends near the molded fittings, because kinked tubing can restrict flow and make a valve appear inconsistent even when the valve is working correctly. Replace the line during planned maintenance when flushing no longer clears the bore or when the tube wall shows damage. For related valves, fittings, syringes, and accessories, browse Chemical Concepts dispensers, mixers, and nozzles. Techcon product family information is available from Techcon.

Need Help?

Need help choosing the right length or Luer connection style? Call (800) 220-1966 or email [email protected].