Techcon Fluid Line Assembly, 0.100 ID x 36 in, Female Luer, Qty 10

Description

This fluid line assembly is one of the dispensing valve parts that connects a cartridge or bulk reservoir to a dispensing valve, receiver head, or applicator tip. It has a female Luer lock fitting on the connecting end, a 0.100 in inside diameter bore, and an overall length of 36 in, rated to 100 PSI (6.9 bar) working pressure. Ten lines ship per pack, priced for shops that keep spares on hand for scheduled line maintenance.

Where These Dispensing Valve Parts Fit

• Bench-mounted dispensing setups that route fluid from a remote reservoir or receiver head to a handheld applicator or valve
• Production lines dispensing adhesives, sealants, lubricants, or coatings through a fixed-position valve mounted away from the material supply
• Rework and repair stations where the valve or gun sits apart from the cartridge, syringe barrel, or bulk tank
• Replacement stock for lines that see routine wear at the fitting or along the tube length

Handling and Fit

Because the fitting is a female Luer lock, the line seats onto any valve, receiver head, or applicator with a matching male Luer connection without tools. The 0.100 in bore keeps flow resistance low for thinner fluids while still handling structural adhesives at moderate viscosity. Rated pressure tops out at 100 PSI, which covers the great majority of bench-mounted pneumatic dispensing work without derating the line. Replacing a line before it cracks or kinks at the fitting avoids a mid-run material leak on the bench.

Dispensing Valve Parts Specifications

• Inside diameter: 0.100 in
• Length: 36 in
• Fitting: Female Luer lock
• Maximum pressure: 100 PSI (6.9 bar)
• Pack quantity: 10
• Part Number: TSD126-236PK

Order this fluid line when an existing dispensing valve, receiver head, or applicator needs a replacement supply line rather than a full rebuild. Confirm the Luer fitting on the valve or gun end matches before ordering, and measure the bench run length against the 36 in length to avoid tight bends. Browse related equipment in the dispensers, mixers, and nozzles category. For fitting compatibility across fluid delivery lines, see Techcon.

Need Help?

Need help matching fluid line length and fitting style to your dispensing setup? Call (800) 220-1966 or email [email protected].