Techcon TSD126-136PK 36 In. Fluid Line, Male Luer/Open End

Description

This Techcon fluid line assembly is one of the dispensing valve parts used to connect material-delivery components with a standard Luer-lock interface. Part TSD126-136PK is a clear polyethylene line with a 0.100-inch inside diameter and a 36-inch length. It has a male Luer lock on one end and an open tube end on the other, and it is supplied in a pack of 10.

Where the Fluid Line Fits

The assembly provides a defined fluid path between compatible reservoirs, cartridges, syringe barrels, fittings, manifolds, and dispense valves. The molded male Luer connection mates with standard Luer-lock hardware, while the open end can be routed to the connection specified by the equipment setup. Use the clear line when operators need visual confirmation of material movement; Techcon offers separate black variants for light-sensitive materials.

• 0.100 in. (2.54 mm) inside diameter
• 36 in. (914 mm) overall length
• Clear polyethylene construction
• Male Luer lock to open end
• Maximum published working pressure: 100 psi (6.9 bar)
• Package quantity: 10 lines

Selection and Installation Checks

Confirm the required line length, inside diameter, connection gender, and material compatibility before installation. Depressurize the dispensing system, keep the line ends clean, and route the tubing without sharp bends, abrasion points, or side load at the Luer fitting. After assembly, use the equipment procedure to purge air and verify every connection at the qualified working pressure. Replace a line that shows cuts, kinks, deformation, contamination, or a fitting that no longer locks securely.

Browse related dispensers, mixers, and nozzles, and review the manufacturer’s Techcon fluid-line documentation for current selection data.

Need Help?

Need help matching this line to a valve, reservoir, or fitting? Call (800) 220-1966 or email [email protected].