Techcon Gasket for 20 oz Cartridge Adapter

Description

The 20 oz adapter gasket is the sealing ring that keeps a Techcon 20 oz cartridge adapter airtight during pneumatic dispensing. When the retainer threads onto the air cap, this gasket seats between the two so regulated shop air pushes the plunger down the cartridge instead of escaping at the joint. A flat, undamaged seal is what lets the system hold pressure and deliver a steady bead.

Where the 20 oz adapter gasket is used

This seal fits Techcon 20 oz cartridge retainer adapters on bulk pneumatic dispensing setups. Fabrication and assembly shops run 20 oz cartridges of sealant, adhesive, and high-viscosity compounds through these adapters, and the gasket sees a pressure cycle on every part. Sign shops, countertop fabricators, and transportation assembly lines all depend on the adapter holding air so each deposit matches the last. Keeping the seal in good shape protects the cartridge from wasted product and keeps the bead consistent across a full shift of parts.

How the 20 oz adapter gasket holds up

The gasket compresses against the adapter face each time the retainer is tightened, and over many cycles it can flatten, crack, or pick up cured material. A weak seal shows up as slow plunger movement, dripping, or air hissing at the cap. Keeping a spare on the bench means an operator swaps it in seconds and restores full pressure to the cartridge. A fresh seal also protects the threads on the adapter from grit and cured buildup that can score the sealing face.

Specifications

• Use: sealing gasket for Techcon 20 oz cartridge adapter
• Function: maintains airtight seal for pneumatic dispensing
• Manufacturer number: 101-20G
• Sold individually

Keep your bulk dispensing setup sealed and browse related dispensers, mixers, and nozzles for adapters, retainers, and cartridges. For the full Techcon dispensing accessory range, visit Techcon.

Need Help?

Need help spec’ing the right cartridge adapter parts? Call (800) 220-1966 or email [email protected].