ChemSet H2O Glue 25 Foot Spray Hose (1/4 Inch with Fittings)

Description

The Chem-Set H2O Glue spray hose is a 25 foot, 1/4 inch line with fittings that connects the H2O Glue Sticky Stuff 30 lb canister to a spray applicator. The hose is the working link between the canister and the gun, giving an installer enough reach to lay down water-based contact adhesive across large surfaces without dragging the canister behind them.

Where the H2O Glue spray hose fits

This hose is used by shops that have replaced aerosol spray contact cement with the Chem-Set H2O Glue Sticky Stuff canister system. Typical applications are upholstery and foam lamination, headliner and panel work, mattress and furniture assembly, signage substrate prep, and any operation where the spray pattern of an aerosol matters but the cost and waste of aerosols does not. At 25 feet, the hose covers a typical workbench reach plus stockroom-to-bench routing.

How the H2O Glue spray hose performs in the system

The hose carries pressurized water-based adhesive from the 30 lb canister to the spray gun without kinking under normal shop use. Standard 1/4 inch fittings match the canister outlet and the gun inlet on the Chem-Set Sticky Stuff kit. When the run is done, the hose is flushed with water per the canister kit instructions, so the line stays clear and the gun does not load up with cured adhesive.

Order the hose as a replacement or as a second line for a separate spray station. Confirm your existing gun has matching 1/4 inch fittings. For technique on spraying water-based contact adhesive and on canister setup, see the Chemical Concepts YouTube channel. Related spray system components are in our dispensers, mixers, and nozzles catalog.

Need Help?

Need help confirming H2O Glue spray hose fitment with your existing Sticky Stuff canister setup? Call (800) 220-1966 or email [email protected].