Huntsman Araldite TDR 1100-11 Resin (35 lb)

Description

Araldite TDR 1100-11 resin is the A-side component of Huntsman’s TDR 1100-11 two-part epoxy adhesive system, formulated for bonding glass laminate, wood, and plastic components used in the construction of archery bows. This 35 lb pail provides the resin portion for production-scale bonding operations.

Araldite TDR 1100-11 Resin Key Properties

• Thixotropic paste, non-sagging on vertical surfaces
• 2:1 by volume mix ratio with TDR 1100-11 hardener
• Long open time, greater than 90 minutes pot life
• Heat-accelerated cure at temperatures above 170 degrees F (77 degrees C)
• Clear bond line for visible-glue applications
• Compatible with automated metering and dispensing equipment

Where Araldite TDR 1100-11 Resin is Used

The TDR 1100-11 system was developed specifically for archery bow manufacturing, where bonded glass laminate over wood cores must withstand repeated high-flex cycles without delamination. The convenient 2:1 mix ratio simplifies use with cartridge dispensers and meter-mix machines, while the long pot life gives bow makers enough working time to lay up complex limb stacks before gelation begins. Many compound and recurve bow shops standardize on this chemistry for its predictable handling and clear bond line, which makes visual quality control on finished limbs straightforward.

The 35 lb pail size is intended for production volumes. Pair with the matching TDR 1100-11 hardener to complete the system. For technical data sheets and engineering support on the broader Araldite line, visit Huntsman’s Advanced Materials division.

For mix-ratio guidance, larger pack sizes, or recommendations on related epoxy adhesives for your bonding application, call Chemical Concepts at (800) 220-1966 or email [email protected].