Description
The Techcon TS7000 32 pitch IMP rotary dispensing valve is built for precise positive displacement output from paste-like adhesives, sealants, and similar materials. The 32 pitch configuration is the fine-feed version in this group, making it useful when the process needs smaller controlled deposits instead of a heavier bead from the same rotary valve family.
Where this dispensing valve is used
Rotary positive displacement valves are common on benches and automated stations that need consistent dot, line, or bead size from materials that do not flow cleanly through simple pressure-only setups. The feed screw advances material mechanically, so shot size is influenced by valve speed, time, material viscosity, and the installed feed path rather than air pressure alone. That makes the TS7000 family a strong fit for filled adhesives, sealants, solder paste, grease, and other materials where a needle valve may drip or vary as viscosity changes during the shift.
The 32 pitch setup should be selected when a line needs a smaller deposit, tighter control, or slower material movement than a coarser 8 pitch valve. It is a complete valve, not just a wear part, so plan it with the controller, air supply, material reservoir, outlet tip, and any matching disposable feed path before production release.
Selecting this dispensing valve for production
Confirm the required bead size, material viscosity, cycle rate, and cleaning plan before ordering. A fine-pitch valve can improve placement control, but it also needs the right accessory stack to perform well. Keep spare tips, seals, and feed-path components nearby so maintenance can service the valve without removing the whole station from use. During setup, start with conservative speed and pressure settings, then adjust after the first test shots show the actual material response.
| SKU | TECTS7000-32 |
|---|---|
| Product Type | IMP rotary valve |
| Pitch | 32 pitch |
| Use | Positive displacement dispensing |
| Common Materials | Adhesives, sealants, solder paste, grease, and filled compounds |
| Unit | Each |
For tips, feed paths, controllers, and adjacent valve accessories, browse dispensers, mixers, and nozzles. For manufacturer background on Techcon rotary valve systems, visit Techcon.
Need Help?
Need help choosing 32 pitch versus a coarser rotary feed setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.