Description
The Techcon stainless inlet block with 1/4 inch NPT port is a compact feed-side component for valve assemblies, supplied as dispensing valve parts for maintenance and rebuild work. It gives the fluid line a clean threaded entry point before material moves through the valve.
Where These dispensing valve parts Fit
This inlet block is sized for dispensing stations that use 1/4 inch NPT feed hardware. It fits smaller valve builds, compact manifolds, and bench systems where a 3/8 inch inlet would be more than the process needs. Stainless construction is useful where operators clean equipment often or where adhesives, sealants, primers, and coatings can be hard on softer hardware.
Use this block when the original inlet has thread wear, sealant buildup, corrosion, or damage from a seized fitting. A damaged inlet can leak externally or pull air into the fluid path, which shows up as inconsistent bead start, delayed dispense, or bubbles in the purge. Replacing the block during a valve rebuild is often faster than trying to chase damaged threads and hoping the next fitting seals.
How These dispensing valve parts Protect the Feed Path
Clean the mating surfaces, confirm the thread size, and install with the sealant approved for the chemistry being dispensed. Support the hose or tube so it does not hang from the block. After reconnecting, purge slowly and watch for weeping around the port. A stable inlet lets the valve do its job without compensating for feed-side leaks or restriction.
For stations using two-part material, keep this component separate from disposable outlet hardware. It is not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. It sits in the valve hardware path, where fit, clean threads, and correct port size matter before any material reaches the final dispense tip.
dispensing valve parts Specs
| SKU | TEC941A-000-001 |
|---|---|
| Product Type | Material inlet block |
| Port Size | 1/4 inch NPT |
| Material | Stainless steel |
| Function | Fluid feed connection for dispensing valve |
| Brand | Techcon |
For feed fittings, valves, cartridges, and other dispense hardware, browse Chemical Concepts dispensers, mixers, and nozzles. For current manufacturer information, visit Techcon.
Need Help?
Need help matching stainless valve hardware to your material, port size, or rebuild kit? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.