Techcon In-Line Filter Kit Assembly for Precision Dispensers (881-000-000)

Description

The Techcon in-line filter kit assembly protects a precision dispenser from fluid that can be pulled back up the air line during a vacuum or suck back cycle. Among protective dispensing valve parts, this filter sits between the syringe barrel and the dispenser, trapping any material that tries to travel the wrong way and keeping it out of the controller.

Where these dispensing valve parts fit

Install the in-line filter whenever the job runs corrosive or flammable fluids, since those materials do the most damage if they reach the dispenser. If the barrel is used without a piston, the filter belongs on the receiver head to guard the same path. It fits Techcon precision systems including the TS250, TS255, TS350, and TS355, and it protects the whole fluid path from a costly repair caused by contamination inside the unit.

How the filter holds up

The housing is molded from polypropylene with a 0.2 micron PTFE filter element and a maximum operating pressure of 75 psi. If a barrel is knocked over or dropped, the element catches the fluid before it runs back toward the dispenser. Check the element for loading or discoloration and change it on a schedule so airflow and suck back stay consistent. A clogged element restricts airflow, so a spare filter in the drawer keeps a line running when the element finally loads up.

Ordering these dispensing valve parts

Confirm your dispenser model and the fluids you run before setup, and keep a spare filter with the barrels and receiver heads it protects. For related barrels, receiver heads, and fittings, browse dispensers, mixers, and nozzles. Current in-line filter information is available from Techcon.

Need Help?

Need help fitting a filter to your dispenser model? Call (800) 220-1966 or email [email protected].