Description
The Cox JetFlow 3 is a pneumatic dispenser for standard 310 mL cartridges of single-component adhesive and sealant. Air pressure drives the plunger instead of a hand trigger, so the operator gets a steady bead with far less fatigue across a long shift. The gun runs on shop air up to 75 psi (6.8 bar) and feeds the cartridge through an adjustable regulator.
Where the Cox JetFlow 3 fits
This tool suits production and field work where one-part cartridges run all day: silicones, polyurethanes, MS polymers, butyls, and similar bead-and-seal materials. The air feed keeps flow consistent across the full cartridge, which helps on long seams, glazing beads, and repetitive assembly where a manual gun would tire the hand. Operators who run many cartridges per hour see the biggest gain, since the air feed removes the hand effort that slows a manual job and leaves uneven beads.
How the Cox JetFlow 3 holds up
The barrel is anodized aluminum and the handle is glass-filled nylon, so the body stays light near 0.60 kg (1.3 lb) while taking shop abuse. An adjustable air regulator sets bead rate, and a quick exhaust valve with silencer cuts flow fast and keeps the work quiet. Maximum thrust is roughly 1.2 kN (269 lbf), enough for medium-viscosity cartridge materials.
Specifications
| Spec | Value |
|---|---|
| Type | Pneumatic, single-component |
| Cartridge capacity | 310 mL (10.5 oz) |
| Max air pressure | 75 psi (6.8 bar) |
| Max thrust | 1.2 kN (269 lbf) |
| Barrel length | 235 mm (9.2 in) |
| Weight | 0.60 kg (1.3 lb) |
| Build | Anodized aluminum barrel, glass-filled nylon handle |
Pair the gun with the right cartridge format for your material and keep a spare regulator on hand for busy lines. Browse related dispensers, mixers, and nozzles for cartridge and bulk options, and review the full applicator range from PC Cox.
Need Help?
Need help matching a pneumatic gun to your cartridge size and air supply? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.