Description
LORD 3170 Part A is the resin side of the Parker LORD 3170 equal-mix epoxy adhesive system. This quart package supports maintenance, lab, and production work that needs the matching Part A component for controlled two-part mixing.
LORD 3170 Part A Benefits
- Pairs with LORD 3170 Part B in a 1:1 mix ratio by volume.
- Supports structural bonding on metals, glass, reinforced plastics, ceramics, and foam materials.
- Designed for assemblies that may see cryogenic temperature exposure after cure.
- Can be room-temperature cured or heat cured when the full system is mixed and applied correctly.
- Quart packaging is practical for qualification runs, repairs, and smaller production batches.
Use this resin when an approved process calls for the 3170 system and the shop already controls surface preparation, mix ratio, and cure schedule. The adhesive is normally applied with a spatula, trowel, or other bulk dispensing method after both components are blended into a uniform mix. Keep bond surfaces clean and dry before application so the adhesive can wet the prepared substrate.
Common Applications for LORD 3170 Part A
- Cryogenic bonding programs in aerospace, laboratory, and engineered equipment.
- Metal-to-metal joints that need the specified Parker LORD 3170 adhesive system.
- Glass, ceramic, reinforced plastic, and foam bonding on compatible prepared surfaces.
- Repair work, prototypes, and process trials using bulk two-part epoxy.
Compatible Materials
- Use only with the matching LORD 3170 Part B hardener.
- Listed substrates include metals, glass, reinforced plastics, ceramics, and foam materials.
- Prepared surfaces should be free of oil, dust, mold release, rust, and loose contamination.
LORD 3170 Part A Technical Specifications
| Property | Value |
|---|---|
| SKU | LOR3003617 |
| Component | Part A resin for two-component epoxy adhesive |
| Package Size | 1 quart can |
| Mix Ratio | 1:1 by volume with matching hardener |
| Typical Working Time | 2 hours at 75 degrees F |
| Typical Handling Strength | 24 hours at room temperature |
Packaging and Ordering
Order this resin with the correct companion hardener and any process supplies required for mixing and placement. You can browse related epoxy adhesives for compatible bonding materials, or visit Parker for broader LORD technical resources.
Need Help?
If you need help matching Part A to the correct hardener, cure schedule, or substrate preparation plan, call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.