LORD Maxlok MXF Acrylic Adhesive Pail

Description

LORD Maxlok MXF is a Parker LORD acrylic adhesive pail for structural bonding work where metal and composite assemblies see impact, peel, vibration, or changing temperatures. The Maxlok MX family is designed to replace welding, brazing, riveting, and other mechanical fastening methods in selected assemblies when adhesive bonding is the better process fit.

LORD Maxlok MXF Uses

• Bonding unprepared metals with limited surface preparation compared with many structural systems.
• Joining FRP and polymer composite parts in sign, transportation, marine, and fabrication work.
• Replacing or reducing mechanical fasteners where load transfer across the bondline matters.
• Shop dispensing programs that use meter-mix equipment with pail packaging.

The current listing identifies this SKU as a pail package for LORD Maxlok MXF. Parker data for the Maxlok MX series describes off-white to tan adhesive pastes paired with MX accelerator, 4:1 by volume mix ratios, and working-time options across related T3S, T6S, and T18S grades. Use the specific lot documents and current Parker data sheet to confirm the correct grade, accelerator, pump setup, and cure schedule before production use.

LORD Maxlok MXF Handling

• Run through approved meter, mix, and dispense equipment matched to the 4:1 system.
• Keep pails closed when not connected to dispensing equipment.
• Slide mated parts into alignment rather than pulling them apart and re-exposing adhesive to air.
• Store away from heat, sparks, and open flame according to the current SDS.

Technical Notes

Parker literature for the Maxlok MX series lists acrylic chemistry, room-temperature cure, high peel and impact use cases, and a full cure period of about 24 hours at room temperature. Typical data includes service temperature guidance, non-sag paste handling, and resistance to many shop fluids after cure.

For related MMA and structural bonding options, browse Chemical Concepts structural adhesives. For manufacturer information, visit Parker LORD.

Need help confirming the grade, accelerator, and dispensing equipment for this pail? Call (800) 220-1966 or email [email protected].