LORD Pak 200 Pneumatic Gun, 1:1 and 2:1

Description

The LORD Pak 200 pneumatic gun is **dispenser parts** hardware for applying two-component adhesive packages in 1:1 and 2:1 ratios. It is used when a shop wants air-powered trigger control instead of a manual drive, especially on repeated beads where consistent plunger pressure helps keep material moving through the mixer.

### Where these dispenser parts fit

LORD and Parker adhesive systems are often packaged for structural bonding, panel assembly, maintenance repair, transportation work, sign fabrication, and metal or composite bonding. The applicator is the part that translates shop air into controlled cartridge movement. When the gun ratio, cartridge, and mixer are matched, both sides of the package advance together and feed the mixed adhesive at the intended proportion.

The Pak 200 format is useful for teams dispensing several cartridges during a shift or applying longer beads where hand fatigue would make a manual gun less consistent. Pneumatic operation does not replace surface preparation, mix verification, or fixture planning, but it gives the operator steadier pressure and cleaner starts once the cartridge is purged. Keep the matching mixing nozzle, 2 part mixing nozzle, and jb weld mixing nozzle inventory separated by material family and ratio to avoid outlet mismatches.

### How dispenser parts control application

Set the gun up for the cartridge ratio before loading material. Confirm the plungers align with the cartridge pistons, connect regulated air, and keep pressure within the applicator and adhesive-system guidance used by the shop. Purge both components to the outlet, attach the static mixer, then dispense a short waste bead until the color and flow are even. Start the bond line only after the mixed bead looks uniform.

Good setup also includes the outlet hardware. A mixer that is too short, damaged, or partly cured can create back pressure, poor mix quality, or a sudden change in bead size. Keep spare mixers with the gun and remove used mixers before adhesive cures in the nose. Mark ratio-specific parts clearly so replacement hardware is selected before the cartridge is opened.

### Specs for LORD dispenser parts | SKU | LOR3004274 |
| -| -|
| Product Type | Pneumatic dispensing gun |
| Compatible Ratios | 1:1 and 2:1 |
| Use | Two-component adhesive dispensing |
| Brand Family | LORD / Parker |
| Related Items | Cartridges, plungers, retainers, static mixers | Choose this gun when air-powered dispensing is preferred for compatible LORD adhesive packages and ratio-specific cartridge work. Browse related [dispensers, mixers, and nozzles](https://www.chemical-concepts.com/product-category/dispensers-mixers-nozzles-3/) for mixers and cartridge accessories used in the same setup. For manufacturer context on LORD adhesive technologies, visit [Parker](https://www.parker.com).

### Need Help?

Need help matching cartridge ratio, mixer length, and air pressure for a LORD adhesive? Call [(800) 220-1966](tel:8002201966) or email [[email protected]](mailto:[email protected]).