Description
The Lord Pak manual dispenser is a hand-powered applicator gun that dispenses two-part Parker LORD adhesive from a 400 mL cartridge without any air supply. It is the go-to tool for field repairs, service work, and low-volume bonding where portability matters more than cycle speed.
What the Lord Pak manual dispenser does
A ratcheting drive pushes both cartridge plungers together at the correct ratio, feeding a static mixing nozzle that blends the adhesive as it leaves the gun. Because it needs no compressor or hose, the applicator goes anywhere the repair is, from a shop bench to a job site or a vehicle bay.
Where the Lord Pak manual dispenser is used
Maintenance crews, sign shops, and fabricators use this manual gun to run LORD structural acrylics, urethanes, and epoxies in 400 mL cartridges. It supports common mix ratios used across the LORD-Pak cartridge range, so one gun body covers several adhesive families when the matching cartridge and mixer are installed.
Specifications and ordering
Cartridge capacity is 400 mL and actuation is manual, with no air line required. Matching cartridges, mixing nozzles, and pneumatic alternatives are stocked in the dispensers, mixers and nozzles category at Chemical Concepts. Applicator specifications are published by Parker LORD. To confirm the right gun for your cartridge, call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.