Medmix 400ml C-System Empty 1:1 Ratio 2-Part Cartridges with Pistons & Sealing Caps (AC 400-01-10-01)

Description

Medmix 400ml C-System Empty 1:1 Ratio 2-Part Cartridges with Pistons & Sealing Caps (AC 400-01-10-01) are industrial-grade, silicone-free empty cartridges built for two-component adhesives and sealants run at a 1:1 mix ratio. Each cartridge holds 400ml (13.2oz) of material across two equal barrels, ships with matching sealing pistons and a resealable cap, and follows the C-System format used with a matching manual or pneumatic 400ml dispenser and a static mixing nozzle.

Medmix 400ml C-System Cartridge Benefits

• Keeps the two adhesive components separated until a static mixer is attached, so material stays usable in storage.
• Equal 1:1 barrels deliver consistent metering for two-part systems that need accurate ratio control.
• Industrial-grade construction rated to 100 psi sustained dispensing pressure.
• Silicone-free, so they suit bonding and sealing jobs sensitive to silicone contamination.
• Includes pistons and a resealable cap, ready to fill, seal, store, and dispense.
• Standard C-System fit works with bell-style and integrated-nut static mixers and matching 400ml guns.

Common Applications

• Repackaging bulk two-part epoxies, acrylics, and urethanes into job-ready cartridges.
• Production and assembly lines that need metered 1:1 dispensing.
• Structural bonding of metals, composites, plastics, and ceramics.
• Potting, sealing, and gap-filling with two-component compounds.
• Maintenance and repair work where controlled adhesive output matters.
• R&D and small-batch filling of custom two-part formulations.

Surface Prep and Use

Fill each barrel with the corresponding component, then insert the supplied pistons to remove trapped air before sealing with the cap for storage. When ready to dispense, remove the cap, attach a compatible bell-style or integrated-nut static mixing nozzle, and load the cartridge into a matching 400ml dispenser. The mixer combines both components as they extrude, so curing begins only at the point of use.

Mixing nozzles are generally single-use and should be replaced between jobs once material has cured inside them. Confirm the mix ratio of your adhesive matches the 1:1 cartridge before filling, and pair the cartridge with the correct nozzle and dispenser for your volume and ratio.

Ordering and Product Support

These empty cartridges need a static mixing nozzle and a matching dispenser to put material down. Browse our dispensers, mixers and nozzles to complete your setup. Cartridges are manufactured by Medmix, the established name in two-part fluid packaging and dispensing. For help selecting the right ratio, nozzle, or dispenser, call (800) 220-1966 or email [email protected].