Medmix 50ml B-System Empty 10:1 Ratio 2-Part Cartridges with Pistons & Sealing Caps (AB 050-10-10-01)

Description

The Medmix 50ml B-System empty 10:1 ratio 2-part cartridge gives you a clean, controlled way to store and dispense two-component adhesives, epoxies, silicones, and urethanes. Each cartridge ships empty with the matching pistons and sealing caps, so you fill it with your own material and keep the two parts fully separated until the moment you dispense. The B-System format uses the distinct gray cap and pairs with orange static mixing nozzles that carry a gray inlet. Manufacturer part number AB 050-10-10-01.

This is an empty cartridge. To dispense, you need a matching 50ml manual or pneumatic dispensing gun and a B-System static mixer nozzle sized for the 10:1 ratio. The gun drives both pistons forward at the correct ratio, and the static mixer blends the two parts as they exit so the material cures the way the formulator intended.

Benefits

• Keeps both components fully separated in storage, which prevents cross-contamination and premature cure.
• Accurate 10:1 metering when paired with the correct 50ml gun and mixer.
• Pin-style sealing pistons let trapped air escape during insertion, then lock closed with a push of the pin.
• Reusable, refillable format for shops that buy adhesive in bulk and package their own.

Common Applications

• Filling and dispensing bulk two-part adhesives, epoxies, silicones, and urethanes.
• Production and repair work that needs repeatable shot sizes at a 10:1 mix ratio.
• Assembly, bonding, potting, and sealing where precise metering matters.

Surface Prep and Use

Clean and dry the bonding surfaces before application. Fill the cartridge with your two-part material, insert the supplied pistons, and seat them so trapped air escapes before sealing. Load the cartridge into a matching 50ml B-System dispensing gun, attach a fresh static mixer nozzle, and purge a small amount until the bead shows even color. Always follow the adhesive manufacturer’s mix ratio, working time, and cure guidance. Use a new mixer for each session or after the material in the nozzle has set.

Ordering and Product Support

Need the dispensing gun, mixers, or sealing accessories to go with these cartridges? See our full range of dispensers, mixers, and nozzles. Cartridges are manufactured by medmix. For sizing help, volume pricing, or to confirm the right mixer and gun pairing, call Chemical Concepts at (800) 220-1966 or email [email protected].