Medmix Sulzer Mixpac MFH Static Mixer Nozzles

Description

Static mixer MFH nozzles are Mixpac disposable mixing tips for F-series two-component cartridges. The product record identifies use with 200 mL and 400 mL cartridges in 1:1 and 2:1 ratios. These plastic nozzles are used to mix epoxies, urethanes, silicones, acrylics, methacrylates, and other two-part adhesives or sealants as they move through the mixer body.

Where Static mixer MFH nozzles are used

MFH nozzles support production, repair, fabrication, construction, and maintenance work where a two-part cartridge must dispense mixed material cleanly. They are useful for bonding, sealing, potting, and filling tasks when the cartridge system calls for the F-series interlock connection. Keeping the correct nozzle on hand helps protect cure quality and reduces waste at startup.

Static mixer selection checks

Check cartridge series, ratio, outlet connection, and required element geometry before selecting a mixer. The right nozzle should match the adhesive package and dispensing gun. Purge the beginning of a new cartridge as recommended by the material supplier, and replace the nozzle when cured material blocks the internal elements. Do not substitute a nozzle solely because it appears to fit.

This row is a generic MFH family listing, so the exact nozzle variant should be checked against the cartridge and the adhesive supplier’s recommendation. If your line uses both 1:1 and 2:1 products, keep labeled bins for each mixer family. That small step helps avoid cross-use during busy dispensing work. Confirm the accepted nozzle before production if the assembly has narrow cure or flow tolerances.

MFH nozzle specifications

For related cartridge tools and consumables, browse dispensers, mixers, and nozzles. For manufacturer background, visit medmix.

Need Help?

Need help choosing between MFH, MFHX, MFQ, and MFQX mixers? Call (800) 220-1966 or email [email protected].