Techcon TS12SS Metal Dispensing Needle, 12 Gauge x 1/2 In, Pack of 12

Description

The Techcon TS12SS-1/2PK is a 12-gauge, all-metal dispensing needle designed for high-precision use in automated fluid-dispensing applications. Its 1/2-inch cannula is stainless steel, and the Luer-lock hub is nickel-plated brass. The part is supplied in a package of 12 needles.

This TS-SS Series tip has a maximum operating pressure of 100 psi (6.9 bar). Its defined gauge, length, materials, connection, pressure rating, and package quantity make it easy to match against an equipment list or process specification. Confirm that the 12-gauge size and 1/2-inch length suit the required deposit before installation.

Dispensing Needle Specifications

• Part number: TS12SS-1/2PK
• Type: precision metal needle
• Gauge: 12
• Cannula length: 1/2 in (12.7 mm)
• Cannula material: stainless steel
• Hub material: nickel-plated brass
• Connection: Luer lock
• Maximum operating pressure: 100 psi (6.9 bar)
• Package quantity: 12

Using This Dispensing Needle

Before use, verify the part number, connection, and pressure limit against the dispensing equipment and written process requirements. Install the tip only on compatible Luer hardware, and inspect the cannula and hub for visible damage or blockage. Do not exceed the stated 100 psi maximum. Fluid compatibility, dispense pressure, shot time, and material flow should be confirmed through the process owner’s normal setup and validation procedure.

Use the 12-gauge configuration when the approved process calls for the TS12SS-1/2PK rather than substituting a different gauge or length. Maintaining the specified tip geometry helps keep equipment setup consistent from one changeover to the next. Replace any tip that is bent, damaged, obstructed, or unable to produce the validated deposit.

Keep unused pieces in their labeled package until needed so the part number, gauge, length, and package identity remain clear at the point of use. Separate damaged tips from usable inventory and follow the site’s procedure for handling any component that has contacted process fluid.

Browse related dispensing valves, mixers, and nozzles, or review the manufacturer’s TS-SS precision metal tip series. For help confirming whether this dispensing needle fits your process, call (800) 220-1966 or email [email protected].