Description
The Techcon 16P microvalve in the TS5000 6W series uses a fine-pitch rotating feed screw in heat treated tool steel to deposit precise, repeatable shots of fluid for assembly and manufacturing processes. The 16-pitch rotor produces smaller fluid volumes per rotation than the 8-pitch variant, making it well-suited for tight shot sizes, lower-viscosity formulations, and applications where material economy and precision matter. Heat treated tool steel in the material path extends rotor service life when running adhesives, sealants, and other fluids with abrasive wear potential.
Where the Techcon 16P microvalve works best
The 16-pitch rotor targets applications where smaller, more controlled deposits are needed. Electronics assembly is a common fit: micro-dispensing of underfill adhesives under flip-chip packages, small drops of UV adhesive onto lens assemblies, thin beads of silicone along board perimeters, and precise drops of thread-locking fluid onto fasteners. Medical device assembly uses this pitch configuration for depositing cyanoacrylates and other fast-cure adhesives onto small-area joints. The fine pitch also suits conformal coating applications where material coverage must stay within narrow width tolerances. Heat treated tool steel extends maintenance intervals compared to standard stainless when running ceramic-filled or metallic-particle adhesives.
How the Techcon 16P microvalve handles fluid
The positive-displacement feed screw means each increment of motor rotation moves a defined volume of material, independent of upstream fluid pressure. This keeps dispense volume consistent even when reservoir pressure varies. Shot sizes as small as 0.010 inch diameter are achievable at rates of 5 or more per second. The 16-pitch feed screw provides finer volumetric control per revolution compared to 8-pitch, translating to more precise metering of lower-viscosity materials. The heat treated tool steel rotor resists wear from abrasive-particle-laden fluids longer than untreated steel. This valve mounts to standard Techcon controller units and integrates into both manual and robot-mounted dispensing setups.
Specifications
| Attribute | Value |
|---|---|
| Model Series | TS5000 (TS5006H) |
| Motor | 6 Watt |
| Rotor Pitch | 16-Pitch |
| Material Path | Heat Treated Tool Steel |
| Min Shot Size | 0.010 inch diameter at 5+ shots/second |
| Bead Width Range | 0.010 to 0.050 inch at up to 4 in/sec |
| Brand | Techcon |
Order with compatible Techcon controllers and dispensing tips through our Dispensers, Mixers & Nozzles category. Visit Techcon for full TS5000 platform specifications.
Need Help?
Need help selecting between the 8-pitch and 16-pitch rotor for your fluid and shot size requirements? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.