Techcon TS6321 Microvalve 8P, Micro Dispensing Valve

Description

The Techcon TS6321 Microvalve 8P is a compact dispensing valve component for placing very small, repeatable deposits of low to medium viscosity fluid. It suits benchtop and automated stations where the deposit has to land in the same spot at the same size, shot after shot, in a footprint small enough to mount close to the work.

Where the dispensing valve is used

Micro deposit work drives the demand for a small valve like this. Electronics and LED assembly lines place tiny dots of adhesive, flux, or conformal coating onto boards and components. Medical device and general manufacturing stations meter small amounts of lubricant, primer, or bonding fluid into parts that leave no room for a full size unit. The compact body mounts on a bracket or robot arm and keeps the fluid path short, which helps hold deposit size steady across a long run.

How the dispensing valve fits the line

As a Techcon component, the TS6321 works inside the Techcon fluid dispensing system alongside cartridges, tips, and a timed controller that sets the open interval. Pairing it with a controller turns operator technique into a fixed cycle, so the deposit does not drift when a different operator runs the station. Keep a spare on hand so a worn unit does not idle a production cell while a replacement is sourced. For controllers, cartridges, and tips that complete the fluid path, browse our dispensers, mixers and nozzles category.

Order the TS6321 as a replacement or spare for a Techcon micro dispensing station. Confirm it matches your fluid viscosity and mounting before release, and see the full Techcon dispensing line for the controller and accessories that run with it.

Need Help?

Need help confirming the right micro dispensing valve and controller for your fluid? Call (800) 220-1966 or email [email protected].