Description
The Techcon 0.014 inch stainless steel nozzle is a precision dispensing needle for controlled fluid output in compact dispensing and spray-valve setups. The small stainless orifice helps meter low-viscosity adhesives, coatings, primers, oils, and marking fluids where the process needs a fine stream or spray feed instead of a broad uncontrolled opening. Use it as a replacement or setup part when the dispense point needs a clean, repeatable outlet.
Where this dispensing needle fits
This nozzle belongs in benches and automated cells that meter small amounts of material through Techcon-style fluid hardware. It can support coating touch-up, adhesive placement, lubrication, marking, and other low-volume fluid work where a larger cap or nozzle would flood the target. The stainless construction makes it a practical choice for repeated setup and cleaning compared with disposable plastic tips, while still requiring normal care to prevent cured residue from blocking the orifice.
The 0.014 inch opening is the critical selection point. Smaller orifices improve control but also increase resistance, especially with higher-viscosity materials. Confirm material flow at the intended pressure before production use, then watch for pattern change during the run. A partly blocked outlet can make a good process look like a pressure problem, so inspect the nozzle before adjusting the controller or reservoir.
How the nozzle supports process control
Keep the nozzle clean, seated, and matched to the valve or adapter it serves. In a spray setup, the fluid outlet, air cap, reservoir pressure, and valve timing all work together. In a non-spray setup, the nozzle still affects bead width, dot size, and start-stop behavior. A consistent outlet helps the operator tune the rest of the system without chasing variation from a damaged tip.
For related tips, caps, valves, and controllers, browse dispensers, mixers, and nozzles. For brand context on dispensing systems, visit Techcon.
Dispensing needle specifications
| Spec | Value |
|---|---|
| SKU | TECT1000570 |
| Part type | Nozzle |
| Orifice | 0.014 in |
| Material | Stainless steel |
| Use | Precision fluid outlet for dispensing hardware |
| Product category | Dispensing accessories |
Ordering details
Order this nozzle when a process needs a fine stainless outlet and the existing tip is worn, clogged, or mismatched to the fluid. Keep spare nozzles with the valve station so a blocked orifice can be replaced quickly during setup. Confirm fit against the valve family and cap style before standardizing it across multiple stations.
Need Help?
Need help matching a 0.014 inch nozzle to fluid viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.