Techcon 4 in Bent Nozzle 30 Degree x 1 in, 1000 Count

Description

Techcon 4 in Bent Nozzle, 30 Degree x 1 in, 1000 Count

This Techcon bent nozzle is a 4 in dispensing needle configured with a 30 degree bend and a 1 in reach. It is sold as a 1000 count pack for production teams that need repeatable access into tight assemblies, recessed bond lines, fixture cavities, or angled dispense points. The bent format helps operators approach the work from the side instead of forcing the dispense valve, syringe, or handheld tool directly over the target area.

Use this nozzle where straight tips make the process awkward or where a controlled offset improves operator access. Common use cases include adhesive beads in housings, potting around components, gasket paths, sealant placement, small assembly bonding, and maintenance of repeat dispense stations. For matching dispense accessories, syringes, valves, and static mixers, see our dispensers, mixers, and nozzles category.

Dispensing needle for angled access

The 30 degree bend changes how the tip reaches the work, while the 4 in overall format gives added working distance from the valve or syringe connection. The 1 in leg helps place material into a defined area without repositioning the whole dispense setup. That can matter in fixtures, small enclosures, and assemblies where nearby hardware limits tool angle.

Dispensing needle for bulk production packs

A 1000 count pack is practical for production cells, maintenance cribs, and high-use dispensing benches. Operators can change tips as needed for clean material flow, process control, or product changeover without waiting on small refill packs. Bulk packaging also helps purchasing teams standardize the same bent nozzle style across repeat jobs.

Selection and setup notes

Match the bend angle and reach to the actual fixture, part geometry, and material path. A lower bend angle can work well for gradual side access, while a steeper angle can help reach around obstructions. Confirm the nozzle connection, material viscosity, dispense pressure, and shot size against the rest of the system before putting a new tip into production. Techcon is the manufacturer reference for current dispensing accessories and system context.

FAQ

Is this sold individually?
This SKU is listed as a 1000 count quantity, which is intended for repeated production use.

How do I choose between bend angles?
Choose the angle that lets the operator reach the dispense point with the least fixture interference while still keeping the bead or dot placement controlled.