Techcon Pyles Nozzle, 2-1/2 x 1/16 in (50-Pack)

Description

The Techcon Pyles nozzle threads onto a 6 oz or 12 oz Pyles cartridge to control bead size and placement when dispensing adhesives, sealants, or potting compounds by hand or with an air powered gun. At 2-1/2 inches long with a 1/16 inch orifice, this nozzle holds a fine bead for detail work rather than a wide fill pass, and it ships in a pack of 50 for shops that swap tips between materials or discard a nozzle once product starts to cure inside it. It belongs to the same dispensing needle and nozzle family Techcon builds around its cartridge and valve systems, so it drops into an existing Pyles setup without changing the cartridge, plunger, or gun.

Where This Dispensing Needle and Nozzle Fits

Production cells running Pyles 6 oz or 12 oz cartridges for structural adhesives, potting compounds, conformal coatings, or gasketing materials reach for this nozzle when the job calls for a narrow, controlled bead instead of a broad fill pass. Aerospace, electronics, and general manufacturing shops keep a stock of these on hand alongside fine tip nozzles for work that shifts between fine detail beads and larger volume passes on the same production run. The 1/16 inch orifice suits tight tolerance placement around connectors, seams, and small fasteners where overspray or excess material would create rework.

Handling This Dispensing Needle and Nozzle Day to Day

Thread the nozzle onto the cartridge tip before loading it into the gun, and seat it fully so the bead runs straight rather than at an angle. Discard the nozzle as soon as material begins to cure inside the orifice rather than trying to clear a clogged tip mid shift, since a partially blocked orifice distorts bead width and can cause inconsistent flow under air pressure. Because the pack holds 50 units, most shops treat this as a running consumable and stage a handful at the workstation rather than reordering one at a time. Store spares in a sealed bag away from solvents and heat to keep the plastic body from becoming brittle before use.

Order this nozzle as a running consumable for any station dispensing from Pyles cartridges, or pair it with matching dispensing needle tips for finer bead control on the same job. Browse Chemical Concepts dispensing valves, mixers, and nozzles for the rest of the Pyles cartridge lineup, or see the complete Techcon dispensing system.

Need Help?

Need help matching nozzle orifice size to your bead width or cartridge system? Call (800) 220-1966 or email [email protected].