Description
This Techcon Pyles cartridge nozzle threads onto standard Pyles cartridge fittings for controlled dispensing of adhesives, sealants, and potting compounds. At 2.5 inches long with a 1/8 inch orifice, it channels material down to a workable bead width without the operator needing a separate tip adapter, and the female buttress thread seats directly onto the cartridge outlet.
Where the Techcon Pyles cartridge nozzle gets used
Production lines dispensing two-part epoxies, RTV silicones, and structural adhesives from Pyles-style cartridges use this nozzle when a job calls for a longer reach than a standard stub tip allows, such as dispensing into a recessed joint or a deep cavity on an assembly. The 1/8 inch orifice suits medium-viscosity materials where a finer tip would clog and a wider tip would waste material on overpour. Electronics assembly, general manufacturing, and mold making shops all keep this nozzle style on hand because the buttress thread locks on securely under dispensing pressure without cross-threading.
Because it ships in a box of 1000, the Techcon Pyles cartridge nozzle works well as a disposable, single-use tip. Swapping a fresh nozzle between dispensing cycles avoids cross-contamination between material batches and keeps flow consistent instead of fighting a partially cured plug from a reused tip.
How the Techcon Pyles cartridge nozzle performs in service
The rigid nozzle body resists deformation under typical cartridge-gun pressure, so the orifice diameter stays consistent bead after bead. The buttress thread pattern is designed to seat and release cleanly, which matters when an operator is working through a full box during a production run and needs each nozzle to thread on the first try.
| Property | Value |
|---|---|
| Length | 2.5 in |
| Orifice / ID | 1/8 in |
| Thread type | Female buttress |
| Compatible fitting | Pyles cartridge system |
| Pack quantity | 1000 |
| Manufacturer | Techcon |
Stock a full box alongside the cartridges and plungers they pair with. For mixing tips, dispensing valves, and related accessories, browse Chemical Concepts dispensers, mixers and nozzles. Techcon publishes full dimensional drawings for its Pyles nozzle line at Techcon.
Need Help?
Need help matching nozzle orifice size to your material viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.