Description
Techcon 988PK is a 50 count Pyles nozzle pack used as a fine-outlet dispensing needle accessory for compatible cartridge dispensing. The nozzle format is 4 inches long with a 1/32 inch opening, giving operators reach and a smaller bead path for adhesive, sealant, coating, or assembly fluid work that needs tighter placement than a 1/16 inch outlet.
Where this dispensing needle nozzle fits
The 4 inch length is useful when the dispense point sits inside a recess, behind a fixture edge, or along a narrow joint. The 1/32 inch orifice supports smaller beads and dots when the material viscosity allows. Use it with matching Pyles cartridge reservoirs and verify thread fit before production. If a material is thick, filled, or fast-curing, test flow before selecting this smaller outlet for a full run.
How this dispensing needle supports process control
Nozzles are part of the qualified dispense setup, not throwaway details. A smaller opening changes back pressure, bead shape, and operator speed, so the approved nozzle size should stay tied to the work instruction. Replace the nozzle if cured material plugs the tip, if the end is cut unevenly, or if switching material could contaminate the next job. The 50 count pack gives maintenance and production teams enough replacements for setup trials and short batch work.
Techcon 988PK specs
| SKU | TEC988PK |
|---|---|
| Part number | 988PK |
| Product type | Pyles dispensing nozzle |
| Length | 4 in |
| Orifice | 1/32 in |
| Package quantity | 50 |
| Use | Fine bead cartridge dispensing |
Order this pack when a compatible Pyles cartridge setup needs a 4 inch reach and a 1/32 inch outlet. For related nozzles, cartridges, and dispensing accessories, browse Chemical Concepts dispensing, mixers, and nozzles. Techcon dispensing products are available from Techcon.
Need Help?
Need help deciding whether 1/32 inch or 1/16 inch is the better outlet for your material? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.