Techcon TEC988-XPK Pyles Nozzle, 4 in x 1/32 in, 50 Pack

Description

Techcon TEC988-XPK Pyles nozzle pack is a dispensing needle set for cartridge work that needs a long, narrow outlet. The nozzle is listed as 4 inches long with a 1/32 inch orifice and buttress female thread, sold as a 50 pack for production benches, maintenance kits, and repeat adhesive or sealant dispensing.

dispensing needle fit and use

This Pyles nozzle helps place material into narrow joints, recessed areas, and controlled beads where a short outlet would leave the operator too far from the work. Use it with compatible cartridge equipment, pressure settings, and material viscosity. For two-component packages, confirm whether the job also needs a static mixer, static mixing nozzle, or 2 part mixing nozzle before the final dispensing tip is selected.

dispensing needle specifications

Set up the nozzle with the cartridge, controller, and pressure needed for the material being dispensed. Start with a controlled test shot, check bead size, and adjust pressure or tip choice before releasing the job. Keep spare mixing nozzle and static mixer nozzle options near the bench when two-part materials are used upstream of the final outlet.

Keep the part number with the job traveler or maintenance list so replacement decisions stay traceable. Match the part to the existing cartridge, valve, or station hardware before opening the package. After setup, document material name, pressure, tip or nozzle choice, first acceptable bead or shot size, and the operator notes from the test dispense so the next technician can repeat the process without guessing.

Browse related dispensers, mixers, and nozzles for cartridges, tips, valves, and static mixers. Current manufacturer information is available from Techcon.

Need Help?

Need help matching nozzle length, orifice size, or cartridge setup? Call (800) 220-1966 or email [email protected].