Techcon TS910 Nozzle Retainer Nut

Description

This Techcon 910-25 nozzle retainer nut is one of the dispensing valve parts listed for the TS910 squeeze tube gun. It secures the nozzle at the dispensing end of the gun. The item is a replacement retainer nut, not a complete gun, nozzle, cartridge, valve, or fluid fitting.

Where These Dispensing Valve Parts Fit

Use 910-25 only when the equipment and service information identify a Techcon TS910 squeeze tube gun and call for the nozzle retainer nut. The TS910 is designed to dispense material from collapsible tubes. Because the retainer belongs at the nozzle end of that platform, verify the gun model and the manufacturer part number before ordering. Do not infer compatibility with syringe-barrel guns or other Techcon valve families from the nut’s appearance.

Checking Dispensing Valve Parts Before Service

Before replacing the nut, remove pressure from the dispensing setup and follow the TS910 user guide and your facility’s maintenance procedure. Inspect the nozzle, the mating threads, and the existing retainer. Replace only the component identified by the service callout. Keep the removed part available until the replacement has been compared by model and part number.

During reassembly, start the retainer by hand and make sure it engages the mating threads without cross-threading. The service documentation should govern tightening and restart checks. If the nozzle still does not seat correctly after the retainer is installed, stop and inspect the nozzle and mating components rather than forcing the connection.

Dispensing Valve Parts Specifications

Order the retainer by exact part number and confirm the associated nozzle separately. Browse related dispensers, mixers, and nozzles, or visit Techcon for manufacturer documentation.

Need Help?

Need help confirming 910-25 for your TS910 squeeze tube gun? Call (800) 220-1966 or email [email protected].