Description
The TS1075 spreader nozzle lays a 3/4 inch flat ribbon of adhesive or sealant in one pass, a step wider than the 1/2 inch tips for covering more surface per stroke. Material flows through a 1/8 inch orifice for a heavier film, and the 1/4 inch NPT thread mounts to standard cartridges, manual guns, and sealant cartridge adapters. This listing ships 50 nozzles.
Where the TS1075 Spreader Nozzle Fits
Use it for laminating, panel bonding, and surface coating where a wider, thicker film speeds the job. The 4.5 inch length reaches across larger panels, and the flat tip keeps the bead even from edge to edge. The natural polypropylene body stays non-reactive with most one-part and two-part adhesives, silicones, and sealants.
How the TS1075 Spreader Nozzle Holds Up
Molded from natural high-density polypropylene, the nozzle handles dispensing pressure up to 100 psi. The 3/4 inch by 1/8 inch opening sets a consistent ribbon width and thickness, and the pack of 50 keeps fresh tips on the bench so a clogged or cured nozzle gets swapped without slowing the run. Each tip threads on by hand, so an operator can change nozzles mid-job without tools, and the wider face still rides flat against the substrate for an even lay-down across the full pass.
| Spec | Detail |
|---|---|
| Pack quantity | 50 nozzles |
| Spread width | 3/4 in (19.05 mm) |
| Orifice | 3/4 in x 1/8 in (19.05 x 3.18 mm) flat |
| Overall length | 4.5 in (114.3 mm) |
| Thread | 1/4 in NPT |
| Material | Natural high-density polypropylene |
| Max pressure | 100 psi |
| Item number | TECTS1075PK |
Order the TS1075 when a 1/2 inch ribbon is too narrow and the job needs a wider, heavier film. For more tips, nozzles, and static mixers, browse our dispensing nozzles and mixers, or see the full line at Techcon.
Need Help?
Need help choosing a spread width for your coverage rate? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.