Techcon TSD1400-014APK Buna O-Ring, 1/2 In. ID

Description

dispensing valve parts like the Techcon TSD1400-014APK O-ring are service spares for fluid dispensing equipment that uses a 1/2 inch ID x 1/16 inch C.S. Buna seal. The ten-pack format suits maintenance carts and rebuild benches where small seals are replaced during planned service. Keep this seal with mixing nozzle, 2 part mixing nozzle, and jb weld mixing nozzle supplies so dispensing consumables and valve spares stay organized together.

Where dispensing valve parts Fit

Use this Buna O-ring when the valve, fitting, or service list calls for TSD1400-014APK. Check the removed seal, gland condition, and equipment part number before ordering. If the old O-ring is swollen, cut, flattened, or contaminated, inspect the fluid path as well. A damaged seal can point to cured material, incorrect cleaner, sharp edges, or wear elsewhere in the assembly.

• 1/2 inch ID x 1/16 inch C.S. Buna replacement seal.
• Ten-pack supply keeps rebuild benches stocked for repeat service.
• Useful for dispensing valves and fittings that call for this Techcon part.
• Part-number ordering helps avoid mix-ups with similar O-ring sizes.

Handling and Service Notes

Clean the groove before installing the replacement. Seat the seal evenly and avoid stretching it across burrs or damaged threads. Reassemble the valve using the service method approved for the equipment, then test with the intended fluid and operating pressure. Confirm deposit control, shutoff, and leak behavior before the station returns to normal work.

Technical Specifications

Ordering dispensing valve parts

Order this seal when the service task calls for TECTSD1400-014APK. For related valves, fittings, tubing, and tips, browse dispensers, mixers, and nozzles. Current manufacturer information is available from Techcon.

Need Help?

Need help matching this O-ring to a valve body or maintenance kit? Call (800) 220-1966 or email [email protected].