Techcon P3019VPK 3 cc Viton O-Ring, 6 mm ID x 2 mm CS, 10 Pack

Description

Techcon P3019VPK dispensing valve parts give maintenance teams a 3 cc Viton O-ring set for sealing compatible adapter assemblies. The black O-rings are sized at 6 mm inside diameter by 2 mm cross section and packed in quantities of 10 for bench repair, spare kits, and production support.

Dispensing Valve Parts Fit

Use this O-ring when the service task calls for P3019VPK on a 3 cc adapter head or compatible Techcon fluid setup. A fresh seal helps the adapter assembly maintain pressure and reduces avoidable leaks during dispensing. Inspect the mating surfaces before installation, remove cured material, and replace related worn seals at the same time when the service guide calls for it.

Service and Handling

During service, compare the removed seal with the replacement before the adapter goes back into production. A small dimensional mismatch can create a leak path or make the adapter hard to seat. Keep the pack with the matching adapter parts, then mark the bin by part number so the next repair does not rely on memory. Lubricate only when the equipment service instructions call for it.

Common Applications

• Replacing worn O-rings in 3 cc adapter assemblies.
• Stocking repair kits for syringe barrel and pressure dispensing stations.
• Maintaining adhesive, coating, primer, and solvent dispensing setups.
• Supporting production cells that need small spare seals on hand.

Dispensing Valve Parts Specs

Packaging and Ordering

Order this pack when a repair bench needs traceable seals by part number rather than visual matching. Browse related dispensers, mixers, and nozzles for adapters, barrels, valves, and spare parts. Manufacturer background is available from Techcon.

Need Help?

Need help confirming an O-ring, adapter size, or repair stack? Call (800) 220-1966 or email [email protected].