Techcon TS5322 Outlet Block

Description

The Techcon TS5322 outlet block is one of the front-section dispensing valve parts used on the TS5322 adjustable mini spool valve. It sits at the fluid outlet side of the valve body, where the metered material exits toward the dispensing tip or nozzle connection.

Where dispensing valve parts like this are used

The TS5322 mini spool valve is built for precise medium to high viscosity deposits across beads and shots. Its balanced spool design helps the valve open and close quickly while the suck-back action pulls a small amount of material away from the outlet at shutoff. The outlet block is part of that front fluid path. If it is damaged, worn, cross-threaded, or packed with cured material, the valve can lose pattern control even when the air cylinder and controller are working correctly.

This part belongs with TS5322 valve maintenance inventory, not cartridge consumables. It is not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. Use it when the valve front section needs a replacement outlet block during cleaning, rebuild, or repair.

dispensing valve parts specifications

During repair, relieve fluid pressure, disconnect the fluid line, and remove the valve from service before opening the front housing. Keep the outlet block screws organized so they return evenly and avoid dragging cured adhesive across the seal surfaces during disassembly. Inspect adjacent O-rings, washers, and U-cup seals while the outlet block is removed, because a worn seal can make a new block look like it is leaking. Browse related dispensers, mixers, and nozzles for TS5322 valve spares and accessories. For current valve platform information, visit Techcon.

The standard TS5322 outlet block is used on the non-Delrin version of the mini spool valve, so version control matters. A similar-looking TS5322D part is not the same replacement. For rebuild carts, label the block by valve model and store it beside the proper screw set and seal kit. That prevents a technician from opening the valve twice because a front-section component was pulled from the wrong bin.

Typical replacement triggers include damaged outlet threads, a scarred seal face, cured material that cannot be cleaned without gouging the block, or a leak that remains after normal seal replacement. Once installed, purge the valve with a compatible process fluid or cleaning method before returning it to production. Watch the first deposits at low speed so a remaining tip blockage or pressure issue does not get mistaken for a faulty block.

For uptime planning, keep this block with the seal kit used most often on the same valve platform. That pairing makes rebuilds faster and reduces the chance of reopening the valve after a leak test.

Need Help?

Need help matching an outlet block to your TS5322 valve version and seal kit? Call (800) 220-1966 or email [email protected].