Description
The Techcon roll pin is a dispenser parts replacement item for dispensing-equipment service work where a small zinc-plated spring pin secures a moving or retained component inside a tool, valve, or fixture assembly. The 5/32 inch diameter and 1/2 inch length give maintenance teams a clear size reference when rebuilding a compatible Techcon station from documented parts.
Where these dispenser parts fit
Small hardware can stop a dispensing bench just as quickly as a valve seal or fitting. A roll pin is commonly used as a retained mechanical pin, hinge pin, stop, or locating part inside equipment subassemblies. This part should be ordered when the service drawing or maintenance bill of materials calls for a zinc-plated 5/32 inch by 1/2 inch roll pin, rather than substituting an unverified shop fastener.
Before installation, compare the removed pin to the replacement part, check the bore for burrs or elongation, and clean away old adhesive residue, threadlocker, or metal chips from the area around the joint. A roll pin should seat squarely without forcing the surrounding part out of alignment. If the surrounding hole is damaged, replacing the pin alone may not restore the assembly.
Keep this part separated from disposable cartridge consumables such as a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle, since those parts are replaced by process use while this pin belongs with maintenance spares. That separation helps technicians avoid losing small hardware during rebuilds, especially when a service cart carries both valve repair parts and cartridge dispensing accessories.
Dispenser parts specs and ordering notes
| SKU | TECTSD1124-10-8 |
|---|---|
| Part Type | Roll pin |
| Diameter | 5/32 inch |
| Length | 1/2 inch |
| Finish | Zinc plated |
| Use | Techcon dispensing equipment service hardware |
Order by the documented part number and verify the pin size against the equipment drawing before release. For related valve, fitting, cartridge, and maintenance items, browse dispensing, mixers, and nozzles. For manufacturer background on compatible dispensing platforms, visit Techcon.
Need Help?
Need help matching small service hardware to a dispensing-equipment rebuild? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.