Techcon TS25P 25 Gauge Red Plastic Dispensing Needle

Description

Techcon TS25P red plastic needle is a dispensing needle for controlled fluid placement from compatible cartridges, syringes, and dispense valves. The 25 gauge, 1.5 inch red plastic format is useful when the job needs reach, color identification, and a disposable fluid path for adhesives, sealants, coatings, greases, or compounds.

dispensing needle for Fine Placement

A small gauge tip helps operators place a narrow bead or dot without flooding the part. The longer 1.5 inch body reaches into housings, channels, fixtures, and recessed joints where a short tip would force the operator to tilt the cartridge. Plastic tips are often selected when the fluid path should be changed quickly between materials, colors, or work orders.

Where This dispensing needle Fits

• Bench dispensing from cartridges, syringes, or Techcon valves.
• Adhesive and sealant placement inside narrow channels or recessed features.
• Assembly work where a red 25 gauge tip helps operators confirm size at a glance.
• Short-run and production jobs that use disposable tips to reduce cleaning time.

Technical Specifications

Choose tip size by material viscosity, required bead width, and reach. Test on scrap before production, then keep the same gauge and length for repeat jobs so bead size does not shift between operators. For repeat work, store tip part numbers with the approved pressure, cartridge size, and bead pattern. Replace tips when cured material, nicked outlets, or bent bodies begin to affect placement. Discard used plastic tips according to the material handling procedure for the fluid being dispensed.

Browse related dispensers, mixers, and nozzles for syringes, cartridges, valves, and other tips. Current manufacturer background is available from Techcon.

Need Help?

Need help selecting a dispensing tip by gauge, length, or fluid viscosity? Call (800) 220-1966 or email [email protected].