Techcon TS2P Black 1/10 Gallon Cartridge Plunger

Description

The Techcon TS2P-BLACK-1000 is a black LDPE plunger sized for 1/10 gallon cartridges, built to seal cleanly behind adhesives, sealants, and pastes as they travel through a syringe barrel and cartridge dispensing setup. It ships in a case of 1000, the standard pack size for production lines running Techcon’s 1/10 gallon cartridge system day in and day out.

Built to Prevent Blow-By in Syringe Barrel and Cartridge Systems

Every dispensing operation that pushes material through a barrel or cartridge has the same failure mode to avoid: material bypassing the plunger and fouling the back end. The TS2P-BLACK-1000 is a general purpose wiper-style plunger engineered to prevent that leakage. It’s rated to a maximum operating pressure of 100 psi (6.9 bar), which covers the vast majority of manual and air-powered dispensing applications running 1/10 gallon Techcon cartridges.

The black color is a practical spec choice, not cosmetic. Operators running mixed-material lines use plunger color to visually confirm they’ve loaded the correct plunger type at a glance, cutting down on mis-loads during changeovers.

Where This Plunger Fits in a Syringe Barrel Dispensing Line

The TS2P-BLACK-1000 is a plunger, not the barrel itself, so it helps to be clear on how the two work together: the cartridge holds the material, and the plunger rides inside it, sealing behind the material and advancing it forward under air or manual pressure. Pairing the right plunger with your cartridge is what keeps a dispensing line running clean, without seepage, drips, or air pockets that throw off bead consistency.

Chemical Concepts stocks the TS2P-BLACK-1000 alongside the full range of Techcon cartridges, nozzles, and dispensing valves, so a production line standardized on the 1/10 gallon cartridge format can source plungers, cartridges, and nozzles from one supplier instead of chasing parts across multiple vendors. That matters most when a line goes down over a missing consumable; having one point of contact for the whole cartridge system shortens the fix.

Buyers stocking up for a full production run should factor in typical usage rates: a plunger is consumed with every cartridge fill, so 1000-count cases are sized for facilities running consistent volume rather than occasional touch-up work. Smaller pack sizes of the same plunger are also available for lower-volume shops.

Typical uses for this cartridge and plunger format include structural and general-purpose adhesive dispensing, gasketing, and sealant application on production and assembly lines where consistent bead control matters more than speed.

Browse the full dispensing, mixing, and nozzle lineup for compatible cartridges and nozzles, or see Techcon’s cartridge and dispensing systems for the full technical line card. Questions about compatibility with your current cartridge setup? Call (800) 220-1966 or email [email protected] and we’ll match the right plunger to your system.