COX PPM 300X Manual 600 ml 1:1 Cartridge Dispenser

Description

PPM 300X dispenser is a manual two-component cartridge gun for 600 ml 1:1 adhesive and sealant systems. The 300 x 300 ml cartridge setup gives shops a practical hand tool for metered material placement when powered equipment is not needed.

PPM 300X dispenser Benefits

• Manual drive lets crews run two-component cartridges without air lines, chargers, or floor equipment.
• 600 ml capacity supports larger bead work and repeat repairs from a single cartridge set.
• 1:1 setup keeps the tool matched to equal-volume cartridge systems and compatible static mixers.
• High viscosity support helps with thicker epoxies, urethanes, acrylics, and sealants.
• Support discs and catch plate details help keep cartridge loading steady during use.

This gun is a good fit when the job needs ratio-controlled dispensing but the bead length or daily volume does not justify a pneumatic system. Confirm cartridge geometry, ratio, and mixer before opening adhesive.

PPM 300X dispenser Applications

• 600 ml 1:1 structural adhesive cartridges in assembly and repair work.
• Two-part sealant placement on transportation, marine, and fabrication jobs.
• Field kits where a manual applicator is easier to carry than powered equipment.
• Production trials that need controlled beads before moving to air-powered dispensing.
• Maintenance cells using high viscosity two-component materials in clip-together cartridges.

Setup And Use

Install both cartridge halves evenly and verify that the plungers engage before attaching a mixer. Purge both sides until flow is even, install a fresh static mixer, then dispense a short test bead. Use steady trigger pressure so both components feed through the mixer at the same pace.

Replace mixers when material cures inside or when bead color and texture change. Do not force a blocked mixer, since excess pressure can damage the cartridge or shift ratio control.

Technical Details And Documentation

COX two-component dispenser references describe the range for medium to high viscosity adhesives and sealants. Product data for the PPM 300 X family lists manual drive, 1:1 and 2:1 support in related versions, 450 ml and 600 ml capacities, and 25:1 force ratio. Review current information from COX Dispensers before pairing with a cartridge system.

Ordering Help

For compatible mixers, cartridge guns, and dispensing supplies, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching ratio, cartridge size, and mixer style, call (800) 220-1966 or email [email protected].