Pyles 6 oz Plunged Cartridge (Box of 500)

Description

The Pyles 6 oz plunged cartridge is a syringe barrel supplied with the piston already fitted, ready to fill from the back and dispense from the front. Sold in a box of 500, this plunged format saves a step at the fill station because the piston seats in the bore before the material goes in, giving a clean wipe down the wall as the gun pushes material out.

Where the plunged 6 oz syringe barrel is used

Production cells that fill their own cartridges favor the plunged barrel for repeatable, low-waste dispensing of adhesives, sealants, and potting resins. Aerospace, electronics, and general manufacturing lines load these into pneumatic or manual guns for metered beads and fills. Because the piston is preloaded, operators fill from the rear, cap the front, and stage the cartridge until a mixing nozzle goes on. The box of 500 keeps a high-throughput fill-and-dispense workflow supplied so barrels are always on hand.

How the plunged syringe barrel performs

The molded body holds its bore under gun pressure while the fitted piston tracks straight, so material advances evenly and back-flow past the piston stays minimal. That combination gives a consistent bead and clean shutoff, and it empties more of the cartridge before the piston bottoms out. Fit the right 2 part mixing nozzle to dispense two-component material. To match adhesives and sealants to this cartridge, browse our dispensing mixers and nozzles category, or view the Pyles line at Techcon.

Specifications

Order the box of 500 when you want plunged 6 oz cartridges ready to fill and run. The preloaded piston shortens setup and keeps dispensing clean from the first shot to the last.

Need Help?

Need help choosing between plunged and open cartridges for your fill line? Call (800) 220-1966 or email [email protected].