TensorGrip P307 Low VOC Contact Adhesive

Description

TensorGrip P307 adhesive is a low VOC contact adhesive for porous substrates, foam, insulation, and laminate work where California VOC compliance matters. Tensor identifies P307 as a web spray product with strong initial grab, long-term bond strength, and heat resistance up to 180 F.

TensorGrip P307 adhesive Benefits

• Low VOC formula supports jobs governed by SCAQMD Rule 1168 requirements.
• Web spray pattern helps cover broad porous surfaces with even adhesive placement.
• Strong initial bond lets installers move faster on foam, insulation, and laminate assemblies.
• Heat resistance up to 180 F helps bonded parts hold during storage, transport, and service.
• Canister format supports production benches that need repeatable spray coverage.

P307 is suited for shops that need contact adhesive performance without stepping outside local VOC limits. It is often selected for foam bonding, insulation work, standard laminate, and other porous material applications listed in Tensor literature.

Where TensorGrip P307 adhesive Fits

• Foam-to-foam and foam-to-substrate bonding.
• Insulation panel assembly and field bonding.
• Standard laminate work on approved shop substrates.
• Porous material bonding where high tack is needed.
• California projects that require attention to Rule 1168 contact adhesive limits.

Surface Preparation And Spray Use

Surfaces should be dry, clean, and free from dust, oil, and loose particles before spraying. Shake or prepare the canister according to Tensor instructions, then spray from the recommended distance so the pattern lands evenly without puddling.

Apply adhesive to both surfaces when the bond design calls for contact adhesive placement. Let the adhesive flash as directed, then bring the parts together with firm pressure. Do not close the assembly too early or too late because open time affects grab and final bond quality.

Technical Details And Documentation

Tensor lists P307 as a CA compliant low VOC contact adhesive for foam, insulation, and standard laminate, with SCAQMD Rule 1168 positioning and heat resistance up to 180 F. The South Coast AQMD Rule 1168 page explains the adhesive and sealant VOC framework that many California projects reference. Review current product details from Tensor Global before production use.

Dispensing And Ordering Help

Confirm canister size, spray gun, hose, and cleanup plan before changing from another contact adhesive. Keep valves, hoses, and guns stored as Tensor directs so adhesive does not cure inside the dispensing path.

For related products, browse Chemical Concepts contact cement adhesives. For help with spray equipment, substrate fit, or VOC-sensitive jobs, call (800) 220-1966 or email [email protected].