Techcon TS5000DMP Rotary Valve Insert, Disposable Path, Left Hand

Description

The Techcon TS5000DMPL is the disposable material path insert for the TS5000DMP series rotary dispensing valve, built in a left-hand body configuration to match the mounting orientation of that side of a two-valve or multi-head dispensing cell. Techcon’s Disposable Material Path system swaps the wetted feed screw and housing as one sealed unit instead of asking a technician to flush and rebuild the valve between fluid changes, so this dispensing valve stays in service without a cleaning cycle between jobs.

Where This Dispensing Valve Insert Fits

• Two-component structural adhesive and potting compound dispensing where cross-contamination between shots is not acceptable
• UV-cure fluid dispensing where cured material inside a reused valve would eventually jam the feed screw
• High-mix production cells that change fluid formulations often and cannot afford valve teardown time between runs
• Left-hand mounted valve positions on dual-valve or gantry-style dispensing stations

Dispensing Valve Insert Specifications

• Compatible platform: Techcon TS5000DMP series rotary valve
• Body orientation: left hand
• Feed screw material: Delrin, disposable, replaced as a complete unit
• Feed screw pitch options: 6, 8, and 16, selected to match shot size and material viscosity
• Access: hinged door on the valve body opens for tool-free insert removal and replacement
• Fluid suitability: two-component and UV-cure fluids where wetted-path cleaning is impractical

Keep a stock of both left-hand and right-hand inserts on hand when running a dual-valve dispensing cell, since the two are not interchangeable. Swap the insert as soon as flow rate drifts or the feed screw shows resistance rather than waiting for a full stall, which protects the valve body from a harder rebuild later. Because the whole wetted path leaves with the old insert, there is no solvent flush and no downtime waiting on a rebuilt valve to dry before the next shot. See the manufacturer’s full DMP rotary valve platform at Techcon, or browse related dispensing hardware in the dispensing, mixers and nozzles category.

Need Help?

Need help confirming left-hand versus right-hand fit for your dispensing cell? Call (800) 220-1966 or email [email protected].